FAQ

Lock Instructions

lock instructions

TSA Lock - Pull

TSA Lock – Pull

Please check the proper operation of your TSA lock prior to changing the factory preset combination by making sure that the opening slide can be freely travel only when the dials are set to “0-0-0”.

To change to your own 3-digit combination, enter the current combination (”0-0-0” for initial use) and follow the instructions below.

  1. 1.Using a pen or similar tool, depress the set button (may found on the side of lock) until you hear a “click” sound.

  2. 2.Rotate the dials to select your new combination.

  3. 3.Once your new combination is displayed on the dials, pull the opening slide and let set button back until you hear a “click” sound. Please make a note of your new combination and store it in a safe location. The lock will now release only when the dials are set to the current combination.

  4. 4.To change to another combination, enter the current combination and repeat steps 1-3.

This lock has been designed to comply with TSA regulations, and can be safely opened by correct entry of the combination or by use of a special key issued to TSA authorized personnel only.

TSA Lock - Push

TSA Lock – Push Button

Please check the proper operation of your TSA lock prior to changing the factory preset combination by making sure that the PUSH button can be freely pushed only when the dials are set to “0-0-0”.

To change to your own 3-digit combination, enter the current combination (”0-0-0” for initial use) and follow the instructions below.

  1. 1.Using a pen or similar tool, depress the set button (may found on the side of lock) until you hear a “click” sound.

  2. 2.Rotate the dials to select your new combination.

  3. 3.Once your new combination is displayed on the dials, push the PUSH button and let set button back until you hear a “click” sound. Please make a note of your new combination and store it in a safe location. The lock will now release only when the dials are set to the current combination.

  4. 4.To change to another combination, enter the current combination and repeat steps 1-3.

This lock has been designed to comply with TSA regulations, and can be safely opened by correct entry of the combination or by use of a special key issued to TSA authorized personnel only.

Regular Lock (Non-TSA)

Regular Lock Instruction (Non-TSA Lock)

  1. 1.Unlatch the luggage lock. The pre-programmed combination is 0-0-0. If the lock does not open, please contact the manufacturer.

  2. 2.Push the unlatch button all the way open until it can’t go any farther. While holding the button unlatched, set the new combination. Make sure the numbers line up correctly. After the new codes are set, simply let go of the latch button. The new combination is now set.

Make sure you test the new combination works before locking the zipper pullers in.

© 2011-2013 California Pak International Inc.  All rights reserved.